TiO₂ content:≥93.0 %
Rutile content:≥97.0 %
Inorganic coating:Zr, Al
Rutile content:≥97.0 %
Loss at 105℃:≤0.50 %
Sieve residue:≤0.01 %
Standard B-type Plastisol Viscosity (mPa·s):2258
Foreign Impurity Particle Count (pcs):4
Volatile Matter (Including Moisture) (%):0.31
Appearance:White powder
Average Polymerization Degree:1342
Standard B-type Plastisol Viscosity (mPa·s):2258
Volatile Matter Mass Fraction (%)egree:1300 ± 100
B-type Plastisol Viscosity (mPa·s):4500 ± 2000
Foreign Impurity Particle Count (pcs):≤ 20
Foreign Impurity Particle Count (pcs):≤ 20
Volatile Matter Mass Fraction (%):≤ 0.40
Thermal Whiteness (160℃, 10min) (%):≥76
Viscosity Number (ml/g):115~135
K Value:70
Apparent Density (g/cm³):0.30~0.45
Average Polymerization Degree:1200~1400
Foreign Impurity Particle Count (pcs):≤20
Volatile Matter (Including Moisture) (%):≤0.38
Average Polymerization Degree:1450 ± 100
K Value:74
Inspection Item (with Unit):Typical Standard Value
Apparent Density (g/cm³):0.2~0.3
Inspection Item (with Unit):Typical Standard Value
Brookfield Viscosity (cps):≤ 6,500
0.250mm Mesh Sieve Residue (%):0.4
Fisheye Count (/400cm²):5
Foreign Impurity Particle Count (/900cm²):4
Viscosity Number (mL/g):107~118
Foreign Impurity Particle Count (pcs):≤30
Volatile Matter (Including Water) (%):≤0.4
English
